Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Neck Type
BTB6 / 5pc Maple/Walnut / Neck-through w/Graphite reinforcement rods
Top/Back/Body
Poplar Burl top / Ash/Okoume wing body
Fretboard
Jatoba fretboard / Abalone dot inlay
Fret
Medium Stainless Steel frets
Number of Frets
24 (+ zero fret)
Bridge
MR5S bridge
String Space
16.5mm
Neck Pickup
Bartolini BH2 neck pickup (Passive)
Bridge Pickup
Bartolini BH2 bridge pickup (Passive)
Equaliser
Ibanez Custom Electronics 3-band EQ
Factory Tuning
1C/2G/3D/4A/5E/5B
Strings
D'Addario NYXL32130SL
String Gauge
.032/.045/.065/.080/.100/.130
Nut
Plastic
Hardware Color
Black
Scale
838mm/33"
A : Width
54mm at NUT
B : Width
85mm at 24F (+ zero fret)
C : Thickness
20mm at 1F
D : Thickness
22mm at 12F
Radius
950mmR
Finish
Antique Brown Stained Low Gloss
Color
Antique Brown
Description

Ibanez positioned the BTB846VABL within the BTB Workshop Series as a six-string electric bass built around a neck-through construction. The BTB Workshop Series represented Ibanez's approach to offering extended-range basses with premium tonewoods and active electronics at a dedicated workshop-tier specification.

The neck is a five-piece Maple and Walnut neck-through design reinforced with graphite rods, carrying a Jatoba fretboard with abalone dot inlays, 24 medium stainless steel frets, and a zero fret. Nut width measures 54mm, widening to 85mm at the 24th fret; neck thickness runs 20mm at the first fret and 22mm at the twelfth, with a 950mm radius. The 33-inch (838mm) scale runs at 16.5mm string spacing at the MR5S bridge. The body pairs a Poplar Burl top with an Ash and Okoume wing construction. Pickups are a pair of passive Bartolini BH2 units routed through an Ibanez Custom Electronics 3-band EQ. Hardware throughout is finished in black. The instrument left the factory strung with D'Addario NYXL32130SL strings (.032/.045/.065/.080/.100/.130) in B–E–A–D–G–C tuning.

Owners sourcing replacement parts — including the MR5S bridge saddles, Bartolini BH2-compatible pickups, or stainless steel fretwire matched to the medium profile — are advised to consult a qualified guitar technician or luthier who can confirm fit against the instrument's measured dimensions before ordering.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault