Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Model Name
J-4
Item Number
2910
Country of Origin
Indonesia
Guitar Color Shown
Sea Foam Green (SFG)
Tuners
Schecter
Fretboard
Maple
Neck Material
Maple
Inlays
Black Offset/Reverse Dots
Scale
34" (863mm)
Neck Shape
Thin 'C'
Thickness
@ 1st Fret- .787" (20mm)/ @ 12th Fret- .866" (22mm)
Frets
21 Narrow X-Jumbo
Fretboard Radius
16" (406mm)
Nut
Graph Tech XL Ivory Tusq
Nut Width
1.496" (38mm)
Truss Rod
2-Way Adjustable Rod w/ Heel Access Spoke Wheel
Guitar Colors
Sea Foam Green (SFG)
Hardware Color
Black
Top Contour
Flat Top
Dexterity
Right Handed
Construction
Bolt-on
Body Material
Alder
Bridge
Schecter Custom Bass String Thru (or Top Load)
Controls
Volume/Volume/Tone (Push-Pull Coil-Tap)
Bridge Pickup
Schecter USA MonsterTone-J™
Neck Pickup
Schecter USA MonsterTone-J™
Knobs
Metal Knurled w/ Set Screw
Strings
Ernie Ball 4 String Super Long #2849 (.045-.105)
Case
SGR-UNIVERSAL BASS "Case Sold Separately"
Description

Schecter positioned the J-4 as a four-string, bolt-on bass in its active production line, built in Indonesia with an alder body and a maple neck and fretboard. The instrument carried item number 2910 and was offered in Sea Foam Green with black hardware.

The neck runs a Thin 'C' profile measuring .787" at the first fret and .866" at the twelfth, with a 16" fretboard radius and 21 narrow extra-jumbo frets across a 34" scale. A Graph Tech XL Ivory Tusq nut sits at 1.496" width, and a two-way adjustable truss rod is accessible via a heel-mounted spoke wheel. Both pickup positions carry Schecter USA MonsterTone-J™ single-coil units. The three-knob control layout — Volume, Volume, Tone — includes a push-pull coil-tap on the tone control. The Schecter Custom Bass bridge accepts either string-through-body or top-load stringing. Tuners are Schecter-branded, knobs are metal knurled with set screws, and the instrument shipped strung with Ernie Ball 4-String Super Long #2849 (.045–.105) strings. Inlays are black offset/reverse dots on a flat-top body constructed via bolt-on joint.

Owners sourcing replacement parts — including the Graph Tech XL Tusq nut, MonsterTone-J™ pickup covers, or bridge saddles — should verify dimensions against the specs above and consult a qualified guitar technician for fitting and setup work.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault