Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Model Name
Reaper-6
Item Number
1500
Country of Origin
Indonesia
Guitar Color Shown
Satin Charcoal Burst (SCB)
Tuners
Schecter
Fretboard
Ebony
Neck Material
Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods
Inlays
Pearloid Offset/Reverse Dots
Scale
25.5" (648mm)
Neck Shape
Ultra Thin 'C'
Thickness
@ 1st Fret- .748" (19mm)/ @ 12th Fret- .787" (20mm)
Frets
24 X-Jumbo
Fretboard Radius
14" (355mm)
Nut
Graph Tech XL Black Tusq
Nut Width
1.653" (42mm)
Truss Rod
2-Way Adjustable Rod w/ 5/32" (4mm) Allen Nut
Guitar Colors
Satin Charcoal Burst (SCB)
Hardware Color
Black & Chrome
Top Contour
Flat Top w/Bevel Edge
Dexterity
Right Handed
Construction
Set-Neck w/Ultra Access
Body Material
Swamp Ash
Top Material
Burl
Bridge
Schecter Custom Hardtail w/ String Thru Body
Controls
Volume/Tone (Push-Pull)/3-Way Switch
Bridge Pickup
Schecter Diamond Decimator
Neck Pickup
Schecter Diamond Decimator
Knobs
Metal Knurled w/ Set Screw
Strings
Ernie Ball Regular Slinky #2221 (.010-.046)
Case
SGR-1C "Case Sold Separately"
Description

Schecter positioned the Reaper-6 (item 1500) as a high-specification six-string solidbody within its Reaper series, built in Indonesia with a set-neck construction featuring Ultra Access for upper-fret reach. The body was swamp ash with a burl top and a flat top with bevel edge profile, finished here in Satin Charcoal Burst.

The multi-ply maple and walnut neck incorporated carbon fiber reinforcement rods and carried a 14-inch-radius ebony fretboard with 24 X-Jumbo frets and pearloid offset/reverse dot inlays. The 25.5-inch scale (648mm) paired with a 1.653-inch (42mm) nut width cut from Graph Tech XL Black Tusq. Neck thickness measured .748 inch (19mm) at the first fret and .787 inch (20mm) at the twelfth, profiled as an Ultra Thin 'C'. A two-way adjustable truss rod is accessed with a 5/32-inch (4mm) Allen key. The Schecter Custom Hardtail bridge runs string-through-body and accepts the factory-spec Ernie Ball Regular Slinky strings (.010–.046). Both pickup positions carry Schecter Diamond Decimator humbuckers, wired to a volume control, a push-pull tone control, and a 3-way switch. Hardware is finished in black and chrome. The SGR-1C case was sold separately.

Owners requiring truss rod adjustment, fret work, or replacement of the Graph Tech nut or bridge saddles should consult a qualified guitar technician, who can confirm correct string spacing and saddle compatibility for this hardtail, string-through platform.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault