Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Body Material
Mahogany
Top
Mahogany
Neck Joint
Set Neck
Material
Mahogany
Truss Rod
H-Expander™
Neck Profile
UltraSlim "D" Profile
Radius
15"
Material
Resinator™
Nut Width/Material
Graph Tech™ Black Tusq XL (40 mm)
Fretboard
Resinator™ Fretboard
Inlays
Hagstrom Perloid Block Inlays
Frets
21 Frets
Tuning Keys
Hagstrom Design 22:1 Tuning Pegs
Scale Length
30.75" / 781 mm
Pickups
2 x Hagstrom DynaRail AlNiCo-5 Humbucking Pickups
Pickup Selector
3-Way Toggle Switch
Controls
2 x Volume 2 x Tone W/ Push/Pull For Independent Coil Splits 3-Way Sound Filter Toggle Switch (Center Bypass)
Bridge
Long Travel Tune-O-Matic With Stop Tail Piece
Tuning Keys
Hagstrom Design 21:1 Tuning Pegs
Strings
D'Addario (45-95)
Optional Case
B-63
Optional Bag
B-40
Finish
White Gloss
Description

Hagstrom built the Swede Bass as a return to the classic Swede model after nearly 40 years away from the line. It sat as a short-scale electric bass carrying forward the Swede's established aesthetic into the reissued format.

The body and top are both mahogany, joined to the neck via a set-neck joint. The neck itself carries Hagstrom's H-Expander™ truss rod and is shaped to the UltraSlim "D" profile, with a 15" radius Resinator™ fretboard, 21 frets, and Hagstrom Perloid block inlays across a 40 mm nut fitted with a Graph Tech™ Black Tusq XL nut. Scale length is 30.75" (781 mm). Tuning is handled by Hagstrom Design 21:1 tuning pegs. Two Hagstrom DynaRail AlNiCo-5 humbucking pickups feed into a control layout of two volume and two tone knobs — each tone pot incorporating a push/pull coil-split — alongside a 3-way toggle pickup selector and a 3-way sound filter toggle switch with centre bypass position. The bridge is a long-travel tune-o-matic paired with a stop tailpiece. Strings are D'Addario 45–95. Compatible optional cases are listed as the B-63 hard case and B-40 bag.

Owners seeking setup adjustments, fret work, or parts sourcing for components such as the tune-o-matic bridge, stop tailpiece, or nut should consult a qualified guitar technician or luthier familiar with short-scale electric bass instruments.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault