Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Body Binding
Multiply
Style
Single Cutaway - Asymettrical Design
Material
Mahogany
Neck Joint
Set Neck
Truss Rod
H-Expander™
Material
Resinator™
Position Marks
Hagstrom Pearl Block Inlay
Fretboard Radius
15"
Frets
22 Medium Jumbo
Scale Length
25.5" / 648 mm
Nut
Graph Tech™ Black Tusq XL
Nut Width
43 mm
Pickup Neck
Lundgren Design AlNiCo-2 No. 2 Humbucker
Pickup Bridge
Lundgren Design AlNiCo-5 No. 5 Humbucker
Pickup
Selector 3-Way Toggle Switch
Controls
2 x Volume Control With R/C Circuit, 2 x Tone Control With Push-Pull Coil Split
Tuning Keys
Hagstrom 18:1 Die Cast
Stoptail Bridge
Long Travel Tune-O-Matic Bridge
Strings
D'Addario (10-46)
Optional Case
C-47
Optional Bag
E-19
Body Wood
Mahogany
Neck Material
Mahogany
Finish
White Gloss
Description

Hagstrom developed the Fantomen as a collaboration with the Swedish band Ghost, positioning it as a departure into edgier aesthetic territory while retaining the construction standards that defined Hagstrom's instrument line. The model carried the Swedish word for "The Phantom" and was built around an asymmetrical single-cutaway solid mahogany body joined to a mahogany neck via a mortise-and-tenon set-neck joint.

The Fantomen's neck employed Hagstrom's H-Expander™ truss rod system and a Resinator™ fingerboard, features Hagstrom described as contributing to playing-surface stability and tonal consistency. The 25.5" scale ran across 22 medium-jumbo frets at a 15" radius, with a 43 mm Graph Tech™ Black TUSQ XL nut. Pickups were specified by Lundgren Design: an AlNiCo-2 No. 2 humbucker at the neck and an AlNiCo-5 No. 5 humbucker at the bridge, selected by a 3-way toggle. The control layout provided two volume controls fitted with R/C circuits and two push-pull tone controls wired for coil-splitting. A long-travel Tune-O-Matic bridge paired with a stoptail, and Hagstrom's 18:1 die-cast tuning keys completed the hardware. The body carried multiply binding, and Hagstrom pearl block inlays marked the Resinator™ board. D'Addario 10-46 strings were fitted at the factory.

Owners requiring setup work, fret maintenance, or assistance sourcing compatible replacement hardware — including the long-travel Tune-O-Matic bridge or Lundgren-specification pickups — should consult a qualified guitar technician or luthier familiar with set-neck instruments.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault