Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Neck Type
Wizard-7 / 5pc Maple/Wenge neck w/KTS TITANIUM rods
Top/Back/Body
Richlite top / African Mahogany body
Fretboard
Bound Macassar Ebony fretboard / Off-set Luminlay dot inlay
Fret
Jumbo frets / Prestige fret edge treatment
Number of Frets
24
Bridge
Lo-Pro Edge 7 tremolo bridge
String Space
10.8mm
Neck Pickup
DiMarzio Fusion Edge 7 (H) neck pickup (Passive/Ceramic)
Bridge Pickup
DiMarzio Fusion Edge 7 (H) bridge pickup (Passive/Ceramic)
Factory Tuning
1D,2A,3F,4C,5G,6D,7A
Strings
D'Addario EXL110-7
String Gauge
.010/.013/.017/.026/.036/.046/.059
Nut
Locking nut
Hardware Color
Black
Scale
673mm/26.5"
A : Width
48mm at NUT
B : Width
68mm at 24F
C : Thickness
19mm at 1F
D : Thickness
21mm at 12F
Radius
430mmR
Finish
Natural Flat
Description

Ibanez built the RGDR4327NTF as part of the RGD Prestige Series, a line positioned at the upper tier of the RGD range and distinguished by its extended-scale, seven-string configuration and Prestige-grade construction and finishing standards. The Natural Flat finish placed it among the more understated offerings in the series.

The guitar was constructed around a five-piece Maple and Wenge Wizard-7 neck reinforced with KTS TITANIUM rods, paired with an African Mahogany body topped with Richlite. The bound Macassar Ebony fretboard carried off-set Luminlay dot inlays and ran to 24 jumbo frets with Prestige fret edge treatment, over a 430mm radius. The 48mm locking nut and 673mm (26.5") scale length defined the playing geometry, with neck dimensions measuring 19mm thick at the first fret and 21mm at the twelfth, widening from 48mm at the nut to 68mm at the 24th fret. A Lo-Pro Edge 7 tremolo bridge with 10.8mm string spacing handled vibrato duties, and two DiMarzio Fusion Edge 7 passive ceramic humbuckers — one at the neck, one at the bridge — provided the pickup configuration. Hardware throughout was finished in black. The guitar left the factory tuned 1D–2A–3F–4C–5G–6D–7A and strung with D'Addario EXL110-7s (.010–.059).

Owners sourcing replacement parts — including Lo-Pro Edge 7 components, DiMarzio Fusion Edge 7 pickups, or a compatible seven-string locking nut — should verify measurements against the specifications above and consult a qualified guitar technician for setup or installation work.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault