Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
At A Glance
- Body Shape
- 3/4 size Dreadnought body
- Top
- Sapele top
- Back & Sides
- Sapele back & Sapele sides
- Neck
- PF / Nyatoh neck
- Fretboard
- Nandu Wood fretboard
- Bridge
- Nandu Wood
- Inlay
- White dot inlay
- Soundhole Rosette
- Black & White multi
- Tuning Machine
- Chrome Covered tuners
- Nut Material
- Plastic
- Number of Frets
- 20
- Saddle Material
- Plastic
- Bridge Pins
- Ibanez Advantage
- Strings
- Ibanez IACS6C
- String Gauge
- .012/.016/.024/.032/.042/.053
- String Space
- 11mm
- Factory Tuning
- 1E,2B,3G,4D,5A,6E
- Scale
- 580mm
- A : Width
- 42mm at NUT
- B : Width
- 54mm at 14F
- C : Thickness
- 20mm at 1F
- D : Thickness
- 21mm at 7F
- Radius
- 250mmR
- A : Length
- 15 1/2"
- B : Width
- 12 5/8"
- C : Max Depth
- 3 3/4"
- Finish
- Open Pore Natural
Ibanez produced the PF2MHOPN as part of its PF Series — a line positioned around accessible, full-featured acoustics built to a defined specification. The PF2MHOPN was distinguished within the series by its 3/4-size dreadnought body and an open pore natural finish, the latter leaving the wood surface without a heavy lacquer build-up.
The body was constructed with a sapele top, back, and sides. The neck — designated PF/Nyatoh in Ibanez documentation — carried a nandu wood fretboard and matching nandu wood bridge, with white dot inlays along the board. The nut measured 42mm wide and was made of plastic, as was the saddle. Fret count was 20. The scale length ran 580mm, with a neck thickness of 20mm at the first fret and 21mm at the seventh fret; fingerboard radius was 250mmR. The body measured 15½" in length with a maximum depth of 3¾". Tuning was handled by chrome covered tuners. Ibanez Advantage bridge pins were fitted as standard, and the guitar shipped strung with Ibanez IACS6C strings gauged .012/.016/.024/.032/.042/.053 at standard tuning. The soundhole rosette was a black and white multi-layer binding.
Owners sourcing replacement parts — including saddles, nut blanks, bridge pins, or tuner hardware — should verify measurements against the dimensions documented here and consult a qualified guitar technician for fitting and setup work.
STRAIGHT TALK
What Stands Out
Keep In Mind
From the people who own them
Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.
Owner photos
Put yours on the record.
The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.
What do you know about this one?
Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.
Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Ibanez products? Shop the full Ibanez catalog →
Gear Help, Handled
From spec questions to full builds — players who have lived this gear since 2007.
Since 2007
Fit & Compatibility
- Bridge, tuner, and nut fit confirmed for your guitar
- Pickup and electronics compatibility checks
- Pedal power and amp/cab impedance matching
Mods & Upgrades
- Upgrade paths for the guitars you already own
- Wiring, routing, and hardware swap guidance
- Advice from people who actually do the mods
The Vault
- Discontinued and EOL guitars kept on record
- Specs, history, and known part compatibility
- Share your builds and mods with the community
