Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Model Name
Tempest Custom
Item Number
1723
Country of Origin
South Korea
Guitar Color Shown
Gloss Black (BLK)
Tuners
Schecter Locking
Fretboard
Ebony
Neck Material
Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods
Inlays
Pearloid Split Crown
Scale
24.75" (628mm)
Neck Shape
C'
Thickness
@ 1st Fret- .866" (22mm)/ @ 12th Fret- .925" (23.5mm)
Frets
22 X-Jumbo
Fretboard Radius
14" (355mm)
Nut
Graph Tech XL Ivory Tusq
Nut Width
1.653" (42mm)
Truss Rod
2-Way Adjustable Rod w/ 5/32" (4mm) Allen Nut
Guitar Colors
Gloss Black (BLK)
Hardware Color
Gold
Top Contour
Arched Top
Dexterity
Right Handed
Construction
Set-Neck
Body Material
Mahogany
Binding
Cream Multi-ply
Bridge
TonePros T3BT TOM & T1Z Tailpiece
Controls
Volume/Volume/Tone(Push-Pull)/3-Way Switch
Bridge Pickup
Schecter USA Pasadena Plus™
Neck Pickup
Schecter USA Pasadena™
Knobs
Grip Tip Speed Knob
Strings
Ernie Ball Regular Slinky #2221 (.010-.046)
Case
SGR-4T "Case Sold Separately"
Description

Schecter positioned the Tempest Custom as a set-neck electric guitar built around a mahogany body with an arched top, sitting within the Tempest family as a feature-forward variant distinguished by its gold hardware, multi-ply cream binding, and USA-wound pickup complement. Country of origin is South Korea.

The three-piece mahogany neck incorporates carbon fiber reinforcement rods and carries a C' profile measuring .866" at the first fret and .925" at the twelfth, topped with an ebony fretboard cut to a 14" radius and fitted with 22 X-Jumbo frets. Nut duties fall to a Graph Tech XL Ivory Tusq unit at 1.653" (42mm) width, and a two-way adjustable truss rod with a 5/32" Allen nut is accessible for relief adjustments. The 24.75" scale bridge is a TonePros T3BT tune-o-matic paired with a T1Z tailpiece — both TonePros locking components — while Schecter locking tuners anchor the headstock. Pickups are a Schecter USA Pasadena Plus™ at the bridge and a Schecter USA Pasadena™ at the neck, routed through a Volume/Volume/Tone(Push-Pull)/3-Way Switch control layout with Grip Tip Speed Knobs. Pearloid Split Crown inlays mark the ebony board, and the guitar ships strung with Ernie Ball Regular Slinky .010–.046.

Owners sourcing replacement hardware should note that the TonePros T3BT accepts standard tune-o-matic saddles and the 42mm nut width is a useful reference when fitting a replacement nut; a qualified guitar technician can advise on compatible substitutes for the Graph Tech Tusq unit and truss rod adjustments.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault