Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Model Name
Reaper-6 FR
Item Number
1505
Country of Origin
Indonesia
Guitar Color Shown
Satin Inferno Burst (SIB)
Tuners
Schecter
Fretboard
Ebony
Neck Material
Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods
Inlays
Pearloid Offset/Reverse Dots
Scale
25.5" (648mm)
Neck Shape
Ultra Thin 'C'
Thickness
@ 1st Fret- .748" (19mm)/ @ 12th Fret- .787" (20mm)
Frets
24 X-Jumbo
Fretboard Radius
14" (355mm)
Nut
Floyd Rose 1500 Series
Nut Width
1.625" (41.3mm)
Truss Rod
2-Way Adjustable Rod w/ 5/32" (4mm) Allen Nut
Guitar Colors
Satin Inferno Burst (SIB)
Hardware Color
Black & Chrome
Top Contour
Flat Top w/Bevel Edge
Dexterity
Right Handed
Construction
Set-Neck w/Ultra Access
Body Material
Swamp Ash
Top Material
Burl
Bridge
Floyd Rose 1500 Series
Controls
Volume/Tone (Push-Pull)/3-Way Switch
Bridge Pickup
Schecter Diamond Decimator
Neck Pickup
Schecter Diamond Decimator
Knobs
Metal Knurled w/ Set Screw
Strings
Ernie Ball Regular Slinky #2221 (.010-.046)
Case
SGR-1C "Case Sold Separately"
Description

Schecter positioned the Reaper-6 FR (item 1505) as a high-output, extended-performance electric guitar within its Reaper series, built in Indonesia. The set-neck construction with Ultra Access joined a swamp ash body topped with burl, finished in Satin Inferno Burst. The Floyd Rose 1500 Series bridge and locking nut made the instrument a platform for aggressive tremolo use.

The multi-ply maple/walnut neck was reinforced with carbon fiber rods and carved to an Ultra Thin 'C' profile, measuring .748" at the first fret and .787" at the twelfth. The 25.5" scale ebony fretboard carries 24 X-jumbo frets at a 14" radius, with a nut width of 1.625". Both pickup positions use Schecter Diamond Decimator humbuckers, wired to a volume, a push-pull tone control, and a 3-way switch; knobs are metal knurled with set screws. Hardware is finished in black and chrome. The flat-top body features a bevel edge, and the neck is equipped with a 2-way adjustable truss rod accessed with a 5/32" allen key. Pearloid offset/reverse dot inlays mark the fretboard positions. Factory strings were Ernie Ball Regular Slinky .010–.046.

Owners requiring setup work, Floyd Rose servicing, or compatible locking-nut and tremolo parts should consult a qualified guitar technician familiar with Floyd Rose 1500 Series hardware.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault