Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Material
Ply Maple
Top
Contoured
Style
Semi-Hollow
Neck Joint
Set Neck
Material
Canadian Hard Maple
Truss Rod
H-Expander™
Material
Resinator™
Radius
15"
Inlays
Pearl Block
Frets
21 Medium Jumbo
Scale Length
30,75" (781 mm)
Nut
GraphTech Black Tusq XL
Nut Width
40 mm
Pickups
2 x Dyna Rail - Viking® Bass N/B
Pickup Selector
6-Way Rotary / Neck + Bridge, Single Coil (Outer Coils) / Bridge, Single Coil (Outer Coil) / Neck, Single Coil (Outer Coil) / Neck + Bridge, Humbucking / Bridge, Humbucking / Neck, Humbucking
Controls
2 x Volume / 2 x Tone
Bridge
Long Travel Tune-O-Matic With Hagstrom Trapeze Tail Piece
Tuning Keys
Hagstrom Design 17:1
Strings
.45 - .95
Optional Bag
B41
Optional Case
B62
Finish
Tobacco Sunburst
Handedness
Left-Handed
Description

Hagstrom produced the Viking Bass as a left-handed semi-hollow electric bass, tracing the model's lineage to the Concord bass introduced in 1965. The Viking Bass occupied a distinct position in Hagstrom's catalogue as a short-scale semi-hollow instrument, pairing a classic aesthetic with the tonal flexibility more commonly associated with later design thinking.

The bass was built around a set neck with Hagstrom's H-Expander™ truss rod and a Resinator™ fingerboard featuring pearl block inlays across 21 medium jumbo frets. The 30.75-inch (781 mm) scale runs to a 40 mm GraphTech Black Tusq XL nut. Two Dyna Rail Viking® Bass humbucking pickups — one at the neck position, one at the bridge — feed into a 6-way rotary selector that cycles through six distinct configurations: neck and bridge in humbucking mode, bridge humbucker alone, neck humbucker alone, neck and bridge using outer single-coil coils, bridge outer coil alone, and neck outer coil alone. Independent volume and tone controls are provided for each pickup. The Long Travel Tune-O-Matic bridge pairs with a Hagstrom trapeze tailpiece, and tuning is handled by Hagstrom-design 17:1 ratio tuning keys. The instrument was strung from the factory with .45–.95 gauge strings. Compatible optional soft and hard cases were offered under the B41 and B62 designations respectively.

Owners seeking setup adjustments, pickup height optimisation, or compatible replacement hardware for the Tune-O-Matic bridge or trapeze tailpiece should consult a qualified guitar technician familiar with semi-hollow bass construction.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fitment & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault