Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Material
American Alder
Style
Double Cutaway
Neck Joint
Bolt On
Material
Canadian Hard Maple
Body Binding
None
Truss Rod
H-Expander™
Material
Resinator™
Radius
15"
Inlays
6 mm Pearl Dot
Frets
22 Medium Jumbo
Scale Length
24.75" (628 mm)
Nut
GraphTech Black Tusq XL
Nut Width
43mm
Pickups
3 x Hagstrom Ceramic C-Spin
Pickup Selection
Neck Pickup On/Off, Middle Pickup On/Off, Bridge Pickup On/Off, Master Tone On/Off, Mute On/Off, Top (Bass Cut) On/Off
Controls
1 x Volume With R/C Tone Circuit
Bridge
Long Travel T-O-M Roller Bridge
Tailpiece
Hagstrom Vintage Tremar
Machine Keys
Hagstrom 15:1 Die Cast
Strings
D'Addario EXP 110 (10-46)
Hagstrom Bag
E-20
Optional Case
C-49
Finish
White
Description

Hagstrom introduced the H-III in 1965, positioning it alongside the H-II as part of a range noted for its distinctive switching layout and reputation for easy playability. The model gained a following among punk and grunge players over the years, and Hagstrom later reissued the design under the Retroscape series as a recreated and updated version of the original. The HIII-WHT-U is a double-cutaway, bolt-on neck electric finished in white.

The neck is built from Resinator™ material and features Hagstrom's H-Expander™ truss rod, a 15-inch radius, 22 medium-jumbo frets at a 24.75-inch (628 mm) scale, and a 43 mm GraphTech Black Tusq XL nut. Three Hagstrom Ceramic C-Spin pickups feed a switching system that provides individual on/off control for the neck, middle, and bridge pickups, plus a master tone switch, a mute switch, and a bass-cut switch — the arrangement that defined the original H-series layout. A single volume control incorporates an R/C tone circuit. Hardware includes a Long Travel T-O-M Roller Bridge, a Hagstrom Vintage Tremar tailpiece, and Hagstrom 15:1 die-cast machine keys. D'Addario EXP 110 strings (10–46) are fitted as standard, and the instrument ships with an E-20 bag; a C-49 case is listed as an optional accessory.

Owners requiring setup work, parts matching, or compatibility guidance for the Vintage Tremar tailpiece and roller bridge assembly should consult a qualified guitar technician or luthier.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault