Dunlop EVH117-U MXR Flanger Pedal
- SKU:
- EVH117-U
- Condition:
- New
- Brand
- Dunlop
- Availability:
- Usually Ships in 24 Hours
- Shipping:
- Calculated at Checkout
Related Products
Dunlop
Dunlop EVH5150-U MXR Overdrive Pedal
The EVH 5150 Overdrive features multi-stage MOSFETs, a 3-band EQ, a Boost switch, and a noise gate for a versatile range of OD and distortion tones.
Dunlop
Dunlop M117R-U MXR Flanger Pedal
The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.
Dunlop
Dunlop M152-DUNLOP-U MXR Micro Flanger Pedal
The Micro Flanger provides the same tones and textures as its big brother but with a simpler interface featuring Speed and Regeneration controls.
Dunlop
Dunlop M195-U MXR Noise Clamp Pedal
The Noise Clamp eliminates hiss & excess noise from your effects chain with a single threshold Trigger knob while maintaining riff definition at extreme gain levels.
Dunlop
Dunlop M264-U MXR Fet Driver Pedal
The FET Driver captures the rich, creamy sound of an overdriven tube amplifier with Hi and Lo boost/cut controls for tonal fine-tuning.
Customers Also Viewed
Dunlop
Dunlop EVH90-U MXR Evh Phase 90 Pedal
This pedal features both Script and Block style phasing with graphics inspired by Eddie Van Halen's legendary Frankenstein guitar.
Dunlop
Dunlop EP101-U Echoplex PreAmp Pedal
The Echoplex Preamp recreates the EP-3's legendary preamp mojo, following the same signal path with FET circuitry and a Gain control for up to +11dB boost.
Dunlop
Dunlop EVH5150-U MXR Overdrive Pedal
The EVH 5150 Overdrive features multi-stage MOSFETs, a 3-band EQ, a Boost switch, and a noise gate for a versatile range of OD and distortion tones.
Dunlop
Dunlop EP103-U Echoplex Delay Pedal
The Echoplex Delay comes delivers the legendary tones of the EP-3 tape echo unit with a hi-fi all-analog dry path and a simple control interface, including an Age control to "age" your repeats. No...
Floyd Rose
Floyd Rose Original Stainless Steel Nut Clamping Screws (Set of 3) - FRNCSSSP
Floyd Rose Original Stainless Steel Nut Clamping Screws Set of 3 - FRNCSSSP Genuine nut clamping screws for Floyd Rose Tremolo Systems. Made in Germany. Formed from heat treated stainless steel for...
Dunlop
Dunlop M117R-U MXR Flanger Pedal
The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.
Dunlop
Dunlop M196-U MXR A/B Box Pedal
The A/B Box allows you to route your instrument's signal to two separate output amp paths, with a Thru jack for use with a tuner or other device meant to receive a constant signal.
Dunlop
Dunlop M195-U MXR Noise Clamp Pedal
The Noise Clamp eliminates hiss & excess noise from your effects chain with a single threshold Trigger knob while maintaining riff definition at extreme gain levels.
Dunlop
Dunlop M199-U MXR Tap Tempo Switch Pedal
The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a...
Dunlop
Dunlop M152-DUNLOP-U MXR Micro Flanger Pedal
The Micro Flanger provides the same tones and textures as its big brother but with a simpler interface featuring Speed and Regeneration controls.
Dunlop
Dunlop M134-U MXR Stereo Chorus Pedal
The Stereo Chorus delivers lush analog chorus several controls to shape the tone of the effect and preserve low end frequencies.
Dunlop
Dunlop M222-DUNLOP-U MXR Talk Box Pedal
The Talk Box contains its own amp and speaker driver for modern gigging convenience with Volume, Tone, and Gain controls to fine-tune your sound to taste.
Description
The EVH Flanger features an Unchained switch for instant EVH tone and comes fittingly adorned with Eddie's famous striped graphics.
Specifications
- Input Impedance:
- 470 kΩ
- Output Impedance:
- 1 kΩ
- Signal To Noise:
- >98 dB
- Noise Reduction:
- 2:1 ratio
- Max Delay:
- 12.8 ms
- Rate Range:
- 0.1 Hz to 10 Hz
- Bypass:
- Hardwire
- Current Draw:
- 35 mA
- Power Supply:
- 18 volts DC
