Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
At A Glance
- Type
- 4x10 bass enclosure
- Frequency Response (+/-3 dB
- 70 Hz-10 kHz
- Usable Low Frequency (-10 dB
- 38 Hz
- RMS Power Handling
- 850 Watts
- Impedance
- 8 ohms
- Sensitivity
- 100 dB SPL 1W/1m
- Maximum SPL
- 127 dB
- Components
- 4 custom designed 200 Watt, 10" speakers, 1 Eminence HF driver
- Size (H x W x D
- 26.5 in/673 mm (with feet) x 22.8 in/578 mm x 17.5 in/445 mm
- Weight (approximate
- 64 lb/29.0 kg
- Design and Assembly
- U.S.A.
- Woofer Type
- Neodymium
Ampeg positioned the PN-410HLF-U as a high-output, lightweight bass enclosure within the Pro Neo series, designed to pair with high-output Ampeg bass heads. It was designed and assembled in the U.S.A.
The cabinet housed four custom-designed 10-inch neodymium Eminence woofers alongside a single Eminence HF driver, returning an 8-ohm impedance and an RMS power handling of 850 watts. Sensitivity was rated at 100 dB SPL at 1W/1m, with a maximum SPL of 127 dB. Usable low frequency extension reached 38 Hz (–10 dB), with a frequency response of 70 Hz–10 kHz (±3 dB). The enclosure measured 26.5 in × 22.8 in × 17.5 in (with feet) and weighed approximately 64 lb.
Owners seeking replacement drivers, crossover components, or input cup hardware should verify part numbers against the Eminence specifications for the custom neodymium woofer and HF driver used in this cabinet, and consult a qualified speaker technician for any reconing or internal wiring work.
STRAIGHT TALK
What Stands Out
Keep In Mind
From the people who own them
Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.
Owner photos
Put yours on the record.
The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.
What do you know about this one?
Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.
Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Ampeg products? Shop the full Ampeg catalog →
Gear Help, Handled
From spec questions to full builds — players who have lived this gear since 2007.
Since 2007
Fit & Compatibility
- Bridge, tuner, and nut fit confirmed for your guitar
- Pickup and electronics compatibility checks
- Pedal power and amp/cab impedance matching
Mods & Upgrades
- Upgrade paths for the guitars you already own
- Wiring, routing, and hardware swap guidance
- Advice from people who actually do the mods
The Vault
- Discontinued and EOL guitars kept on record
- Specs, history, and known part compatibility
- Share your builds and mods with the community
