Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
At A Glance
- Type
- 8x10 / Dual 4x10 Bass Enclosure
- Frequency Response (+/3 dB
- 58 Hz – 5 kHz
- Usable Low Frequency (10 dB
- 40 Hz
- RMS Power Handling
- Combined / Mono Mode: 800 Watts 8x10, Split / Dual Mode: 400 Watts each 4x10
- Peak Power Handling
- Combined / Mono Mode: 1600 Watts 8x10, Split / Dual Mode: 800 Watts each 4x10
- Impedance
- Combined / Mono Mode: 4 Ω 8x10, Split: 8 Ω each 4x10
- Sensitivity
- Combined / Mono Mode: 100 dB SPL 1W/1m
- Maximum SPL
- 130 dB
- Components
- Eight Custom Designed, Eminence 100 Watt, 10" speakers
- Size (H x W x D
- 48.0 in/1219 mm (with feet) x 26.0 in/660 mm x 16.0 in/406 mm
- Weight
- 137 lb/62.14 kg (approximately)
- Assembly
- Designed and assembled in the U.S.A.
Ampeg positioned the Heritage SVT-810E (HSVT-810E-U) as a premium, U.S.-assembled iteration of its long-running SVT-810E bass speaker cabinet. The Heritage designation marked it as a higher-specification build within Ampeg's cabinet line, designed to replicate the construction standards associated with the company's classic enclosures.
The cabinet houses eight custom-designed Eminence 10" drivers, each rated at 100 watts, built specifically for this enclosure. The cabinet operates as a single 8x10 configuration in combined/mono mode — presenting a 4 Ω load with 800 watts RMS and 1,600 watts peak handling — or splits into two independent 4x10 sections, each at 8 Ω with 400 watts RMS and 800 watts peak. Sensitivity is rated at 100 dB SPL (1W/1m) in combined mode, with a maximum SPL of 130 dB. Frequency response is specified at 58 Hz–5 kHz (±3 dB), with usable low-frequency extension to 40 Hz (−10 dB). The cabinet measures 48.0 in × 26.0 in × 16.0 in (including feet) and weighs approximately 137 lb.
Owners sourcing replacement drivers, jack plate components, or casters should verify compatibility against the cabinet's dual-mode wiring configuration and impedance requirements before fitting any parts; a qualified speaker technician can confirm correct substitutions.
STRAIGHT TALK
What Stands Out
Keep In Mind
From the people who own them
Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.
Owner photos
Put yours on the record.
The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.
What do you know about this one?
Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.
Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Ampeg products? Shop the full Ampeg catalog →
Gear Help, Handled
From spec questions to full builds — players who have lived this gear since 2007.
Since 2007
Fit & Compatibility
- Bridge, tuner, and nut fit confirmed for your guitar
- Pickup and electronics compatibility checks
- Pedal power and amp/cab impedance matching
Mods & Upgrades
- Upgrade paths for the guitars you already own
- Wiring, routing, and hardware swap guidance
- Advice from people who actually do the mods
The Vault
- Discontinued and EOL guitars kept on record
- Specs, history, and known part compatibility
- Share your builds and mods with the community
