At A Glance
- Signal to Noise Ratio
- >85 dB (50 Hz @ 300mV RMS)
- Maximum Gain
- +18 dB
- Tone Controls
- Treble:+17/-14 dB @ 4 kHz
- Impedances
- Input: 1 MΩ @ NORMAL, 83 kΩ w/-15 dB PAD | Output: 120 Ω
- Power Requirements
- Internal: 9V Battery | External: 9V DC, >20mA, center negative
- Size (H x W x D
- 2.2 in x 2.6 in x 4.5 in | 56 mm x 66 mm x 114 mm
- Weight
- 0.6 lb / 0.3 kg (approximately)
- Signal Type
- Analog
- Effect Type
- Bass Overdrive
Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Ampeg produced the Scrambler-U as a compact bass overdrive pedal in its effects lineup. The unit was designed to deliver what Ampeg described as overdrive ranging from subtle to heavy, with a dry signal blend control allowing the player to mix effected and clean signals together.
The Scrambler-U ran on fully analog circuitry. It accepted a 9V battery internally or an external 9V DC center-negative supply drawing more than 20 mA. Input impedance was 1 MΩ at the normal input, dropping to 83 kΩ when the -15 dB pad was engaged, and output impedance was 120 Ω. Maximum gain was +18 dB, with a signal-to-noise ratio greater than 85 dB measured at 50 Hz with a 300 mV RMS input. The treble control offered a range of +17 to -14 dB at 4 kHz. The enclosure measured 2.2 × 2.6 × 4.5 inches (56 × 66 × 114 mm) and weighed approximately 0.6 lb (0.3 kg).
Owners sourcing a replacement power supply should confirm the center-negative polarity and a minimum 20 mA current rating before use; a guitar technician can assist with any signal-chain or power-related troubleshooting.
STRAIGHT TALK
What Stands Out
Keep In Mind
Ampeg SCRAMBLER-U Bass Overdrive Pedal
From the people who own them
Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.
Owner photos
Owner notes
Put yours on the record.
The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.
What do you know about this one?
Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.
Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Ampeg products? Shop the full Ampeg catalog →
Gear Help, Handled
From spec questions to full builds — players who have lived this gear since 2007.
Since 2007
Fitment & Compatibility
- Bridge, tuner, and nut fit confirmed for your guitar
- Pickup and electronics compatibility checks
- Pedal power and amp/cab impedance matching
Mods & Upgrades
- Upgrade paths for the guitars you already own
- Wiring, routing, and hardware swap guidance
- Advice from people who actually do the mods
The Vault
- Discontinued and EOL guitars kept on record
- Specs, history, and known part compatibility
- Share your builds and mods with the community

