Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Neck Type
SR4 / 5pc Jatoba/Walnut neck
Top/Back/Body
Okoume body
Fretboard
Jatoba fretboard / Abalone oval inlay
Fret
Medium frets
Number of Frets
24
Bridge
Accu-cast B500 bridge
String Space
19mm
Neck Pickup
Bartolini BH2 neck pickup (Passive)
Bridge Pickup
Bartolini BH2 bridge pickup (Passive)
Equaliser
Ibanez Custom Electronics 3-band EQ w/ EQ bypass switch (passive tone control on treble pot) & 3-way Mid frequency switch
Factory Tuning
1G,2D,3A,4E
Strings
D'Addario EXL165
String Gauge
.045/.065/.085/.105
Nut
Plastic
Hardware Color
Black
Scale
864mm/34"
A : Width
38mm at NUT
B : Width
62mm at 24F
C : Thickness
19.5mm at 1F
D : Thickness
21.5mm at 12F
Radius
305mmR
Finish
Brown Mahogany
Description

Ibanez built the SR500EBM as part of the SR (Soundgear) Series, positioning it as a mid-tier four-string electric bass within that line. The SR Series was developed around a slim, lightweight profile intended to reduce fatigue during extended play, and the SR500EBM sat above the entry-level SR models while sharing the line's characteristic emphasis on fast playability and active electronics.

The bass was constructed with an Okoume body and a five-piece Jatoba/Walnut neck — a laminated construction Ibanez designated SR4 — paired with a Jatoba fretboard carrying abalone oval inlays across 24 medium frets. The 34-inch scale runs to a nut width of 38mm, tapering to a 19.5mm thickness at the first fret and 21.5mm at the twelfth, with a 305mm radius. Electronics consisted of a pair of passive Bartolini BH2 pickups at neck and bridge positions, fed into Ibanez's own Custom Electronics 3-band EQ. That preamp included an EQ bypass switch — routing signal through a passive tone control on the treble pot — and a 3-way mid-frequency selector, giving the owner considerable tonal range without leaving the passive Bartolini signal chain. The Accu-cast B500 bridge set string spacing at 19mm. Hardware throughout was finished in black. The instrument left the factory strung with D'Addario EXL165s gauged .045/.065/.085/.105 in standard E tuning.

Owners sourcing replacement parts should note that the Accu-cast B500 bridge, Bartolini BH2 pickups, and the plastic nut are each discrete components with their own replacement specifications; a qualified guitar technician or luthier can assist with confirming compatibility before any parts are fitted.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault