Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Neck Type
EHB6 / 9pc Pangapanga/Walnut neck w/Graphite reinforcement rods
Top/Back/Body
Poplar Burl top / Selected light weight African Mahogany body
Fretboard
Bound Panga Panga fretboard / Abalone off-set dot inlay
Fret
Medium Stainless Steel frets
Number of Frets
24
Bridge
MR5HS bridge
String Space
17mm
Neck Pickup
Nordstrand Custom Big Split neck pickup (Passive)
Bridge Pickup
Nordstrand Custom Big Split bridge pickup (Passive)
Equaliser
Vari-mid 3-band EQ w/ EQ bypass switch (passive tone control on treble pot)
Factory Tuning
1C,2G,3D,4A,5E,6B
Strings
D'Addario EXL170-5SL + 0.32
String Gauge
.032/.045/.065/.080/.100/.130
Hardware Color
Black
Scale
889 mm - 825.5mm
A : Width
54mm at NUT
B : Width
87mm at 24F
C : Thickness
19.5mm at 1F
D : Thickness
21.5mm at 12F
Radius
950mmR
Color
Black Ice Flat
Series
EHB Workshop Series
Description

Ibanez built the EHB1506MSBIF as part of the EHB Workshop Series, a headless electric bass line positioned around ergonomic design and active/passive switching flexibility. The six-string configuration placed it toward the upper end of the EHB range in terms of string count.

The instrument was constructed with a Poplar Burl top over a selected lightweight African Mahogany body, paired with a nine-piece Pangapanga/Walnut neck reinforced with graphite rods — an EHB6 profile. The bound Panga Panga fretboard carried 24 medium stainless steel frets with abalone offset dot inlays, and the radius measured 950mm. Nut width ran 54mm, widening to 87mm at the 24th fret, with neck thicknesses of 19.5mm at the first fret and 21.5mm at the twelfth. The dual-scale configuration spanned 889mm to 825.5mm. Electronics consisted of two Nordstrand Custom Big Split passive pickups routed through a Vari-mid 3-band EQ with an EQ bypass switch; the treble pot doubled as a passive tone control when bypassed. The MR5HS bridge was set to a 17mm string spacing, and all hardware was finished in black. Factory tuning ran B–E–A–D–G–C low to high, and the instrument shipped strung with D'Addario EXL170-5SL stock plus a 0.032 high string, gauged .032/.045/.065/.080/.100/.130.

Owners sourcing replacement frets, nut blanks, or bridge saddles should verify measurements against the figures above before ordering; a qualified luthier or guitar technician can confirm compatibility and carry out any setup work.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault