The Schecter 6199 Pasadena Plus is a bridge-position humbucker. It runs a 4-conductor harness with a split-coil design, which means you can wire it for full humbucker, split single-coil, or series/parallel configurations depending on your switching setup. Output measures 16.0k ohms. Magnet is Alnico V in a direct-coupled construction. The baseplate is solid nickel/silver. Only available for bridge position — this is not a neck pickup.

Two things decide whether this drops into your guitar: pole spacing and string count. This pickup is wound for six strings at 49mm traditional spacing — that is the wider spacing correct for a bridge position on a six-string. A neck pickup runs narrower spacing; if you put a neck-spaced unit in the bridge route, the outer strings run off the poles. Seven- and eight-string routes are a different matter entirely and this pickup does not cover them. Also check how your existing pickup mounts: direct-mount bodies and ring-mount bodies need different hardware, and the route depth has to accommodate the baseplate.

The pole pieces are six nickel-plated carbon steel units at 0.1875" alongside six nickel-plated carbon steel #5 slot pan head Phillips screws — standard adjustable pole configuration. The 4-conductor harness gives you the wiring options; a 2-conductor pickup would not.

If you are not certain this spacing and wiring matches what your guitar needs, send us the make, model, and year and we will check it against what we know.