Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Top
Custom Carved Flame Maple
Style
Single Cutaway
Body Binding
White Perloid
Neck Joint
Set Neck
Material
Mahogany
Neck Profile
UltraSlim "D" Profile
Truss Rod
H-Expander™
Material
Resinator™ Fingerboard /
Radius
15"
Inlays
Pearloid Block
Frets
22 Medium Jumbo
Scale Length
25.50" (648 mm)
Nut
GraphTech Black Tusq XL
Nut Width
43 mm
Pickups
2 x Custom 60 AlNiCo-5 Humbucker
Front Cover
Brushed Aluminum Cover
Pickup Selector
3-Way Toggle Switch
Controls
1 x Tone Control With Push-Pull Coil Split
Bridge
Long Travel Tune-O-Matic
Tailpiece
Hagstrom Sustain Block
Tuning Keys
Hagstrom Design 15:1
Strings
D'Addario (10-46)
Optional Case
C53
Optional Bag
E20
Body Material
Mahogany
Neck Material
Mahogany
Finish
Cosmic Black Burst Satin
Neck Joint Type
Mortise and Tenon
Description

Hagstrom positioned the Ultra Max as a companion to the Ultra Swede, sharing the same small-body concept but with a slightly larger mahogany body topped with a thick custom carved flame maple top. The single-cutaway instrument carried a mahogany set neck joined via a mortise and tenon joint, and was finished in a Cosmic Black Burst Satin.

The neck featured Hagstrom's H-Expander™ truss rod, a Resinator™ fingerboard with a 15" radius and pearloid block inlays, a 43 mm GraphTech Black Tusq XL nut, and a 25.50" (648 mm) scale length across 22 medium jumbo frets — all in the UltraSlim "D" profile. Hardware consisted of a Long Travel Tune-O-Matic bridge, Hagstrom Sustain Block tailpiece, and Hagstrom Design 15:1 tuning keys. Two Custom 60 AlNiCo-5 humbuckers with brushed aluminum covers were wired to a 3-way toggle switch and a single tone control with a push-pull coil split, allowing each humbucker to be split to a single-coil configuration. White perloid body binding completed the trim. The guitar shipped with D'Addario 10-46 strings.

Owners requiring setup assistance, fret work, or help sourcing compatible parts — including standard Tune-O-Matic saddles and posts — should consult a qualified guitar technician or luthier familiar with set-neck instruments of this scale length.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault