Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
At A Glance
- Input Impedance
- 1 MΩ
- Output Impedance
- 1 kΩ
- Max Input Level
- +5 dBV at 500 Hz
- Max Output Level
- +8 dBV
- Noise Floor - Mix at Max CW
- -96 dBV
- Noise Floor - Mix at Max CCW
- -104 dBV
- Delay Distortion
- Delay Time
- 20 ms to 600 ms
- Noise Reduction
- 2:1 ratio
- Modulation Speed
- 0.2 Hz to 2.2 Hz
- Bypass
- True Hardwire
- Current Draw
- 26 mA
- Power Supply
- 9 volts DC
Dunlop positioned the MXR Carbon Copy (M169-U) as an analog delay pedal in the MXR effects line, built around bucket-brigade delay technology. It offered delay times from 20 ms up to 600 ms alongside a modulation circuit, placing it in the warm, lo-fi analog delay category rather than the pristine digital segment.
The Carbon Copy operated on 9 volts DC and drew 26 mA, making it compatible with standard pedalboard power supplies of that voltage and current capacity. Input impedance measured 1 MΩ and output impedance 1 kΩ, which are relevant figures when planning signal chain placement. Maximum input level was +5 dBV at 500 Hz and maximum output level +8 dBV. The noise floor measured -96 dBV with mix at maximum clockwise and -104 dBV with mix at maximum counter-clockwise. Delay distortion was specified at less than 1% at 1 kHz with a -5 dBV input. The onboard modulation section swept from 0.2 Hz to 2.2 Hz. A 2:1 noise reduction ratio was applied to the delay signal. Bypass was implemented as true hardwire, leaving the signal path unprocessed when the effect was disengaged.
Owners requiring service, calibration, or pedalboard integration advice should consult a qualified guitar technician or electronics repair specialist familiar with analog effects units.
STRAIGHT TALK
What Stands Out
Keep In Mind
From the people who own them
Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.
Owner photos
Put yours on the record.
The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.
What do you know about this one?
Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.
Build Your Complete System
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Dunlop products? Shop the full Dunlop catalog →
Gear Help, Handled
From spec questions to full builds — players who have lived this gear since 2007.
Since 2007
Fit & Compatibility
- Bridge, tuner, and nut fit confirmed for your guitar
- Pickup and electronics compatibility checks
- Pedal power and amp/cab impedance matching
Mods & Upgrades
- Upgrade paths for the guitars you already own
- Wiring, routing, and hardware swap guidance
- Advice from people who actually do the mods
The Vault
- Discontinued and EOL guitars kept on record
- Specs, history, and known part compatibility
- Share your builds and mods with the community
