Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Neck Type
Super Wizard HP / 5pc Maple/Walnut neck w/KTS TITANIUM rods
Top/Back/Body
Silky Oak top / African Mahogany body
Fretboard
Bound Macassar Ebony fretboard / Off-set white dot inlay
Fret
Jumbo frets / Prestige fret edge treatment
Number of Frets
24
Bridge
Lo-Pro Edge tremolo bridge
String Space
10.8mm
Neck Pickup
DiMarzio Air Norton (H) neck pickup (Passive/Alnico)
Middle Pickup
DiMarzio True Velvet (S) middle pickup (Passive/Alnico)
Bridge Pickup
DiMarzio The Tone Zone (H) bridge pickup (Passive/Alnico)
Factory Tuning
1E,2B,3G,4D,5A,6E
Strings
D'Addario EXL120
String Gauge
.009/.011/.016/.024/.032/.042
Hardware Color
Cosmo black
Scale
648mm/25.5"
A : Width
43mm at NUT
B : Width
58mm at 24F
C : Thickness
17mm at 1F
D : Thickness
19mm at 12F
Radius
430mmR
Finish
Sunset Burst
Description

Ibanez built the S6570SKSTB as part of the S Prestige Series, positioning it at the upper tier of the S line where Japanese-production standards and premium component sourcing defined the specification. The model carried the Sunset Burst finish over a Silky Oak top on an African Mahogany body, following the S Series tradition of a lightweight, contoured platform suited to high-register playing.

The neck is a Super Wizard HP five-piece Maple/Walnut construction with KTS Titanium reinforcement rods, paired with a bound Macassar Ebony fretboard carrying off-set white dot inlays, 24 jumbo frets, and the Prestige fret edge treatment. The 648 mm/25.5-inch scale runs to a 43 mm nut, widening to 58 mm at the 24th fret, with a 17 mm first-fret thickness and 19 mm at the 12th, all across a 430 mm radius board. The Lo-Pro Edge tremolo bridge is set at 10.8 mm string spacing. The HSH pickup configuration uses three DiMarzio units — an Air Norton humbucker at the neck, a True Velvet single-coil in the middle, and The Tone Zone humbucker at the bridge — each passive/Alnico. All hardware is finished in Cosmo black. The guitar shipped strung with D'Addario EXL120s in a .009–.042 gauging at standard E tuning.

Owners sourcing replacement tremolo components, pickup mounting hardware, or nut stock should verify measurements against the figures above before ordering, and consult a qualified guitar technician for setup, fret work, or any tremolo calibration specific to the Lo-Pro Edge system.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault