Product images are provided for reference and may not represent the exact model, configuration, or included components.

At A Glance

Controls
Master Volume, 3 x Volume, 3 x Gain, Bass, Middle, Treble, Presence, Boost
Wattage
100 Watts
Channels
3
FX/Gate/Reverb
Class A Discrete Instrument Level Loop
Tube Type
12AX7/6L6
Inputs
1 x Standard Guitar Input, FX Return, Footswitch
Outputs
3 x Speaker Jacks, XLR Speaker Emulator, FX Send
Additional Info
12AX7 and 6L6 Tubes
Footswitch
3 Channels + Boost (RF4CHB)
Dimensions
27.00 x 9.45 x 10.04 inches
Weight (lbs
44.09 lbs
Series
RD/Diavlo
Description

Randall built the RD100H-U Divalo as a three-channel, 100-watt all-tube head positioned around a single design priority: gain and tone. It sat within the RD/Diavlo Series, a line Randall described as deliberately stripped of what they considered superfluous features in favour of output and drive.

The amplifier ran on a 12AX7 and 6L6 tube complement and offered three independent channels, each with its own Volume and Gain controls, alongside a shared EQ section of Bass, Middle, Treble, and Presence. A Tube Boost Mode was included, controlled via the Master Volume and Boost control on the front panel. The rear panel carried three speaker output jacks, an XLR speaker-emulated direct output with ground lift, and a Class A discrete instrument-level effects loop with separate Send and Return jacks. A footswitch input accepted the RF4CHB four-function unit, which handled channel selection and Boost switching. The unit measured 27.00 × 9.45 × 10.04 inches and weighed 44.09 lbs.

Owners requiring tube replacement, bias adjustment, or speaker cabinet matching should consult a qualified amplifier technician familiar with high-voltage tube circuitry.

Q&A
Have Questions?
The owner archive

From the people who own them

Nothing in The Vault is for sale. These records exist so the instruments stay documented after the manufacturer moves on — and the most useful part of that record is what owners add to it.

Owner photos

Owner photos

Put yours on the record.

The catalog shot showed one finish, under one light, a long time ago. Yours has been played. Photos from owners are what the next person finds when they are trying to identify a part, match a finish, or work out whether the one they just bought is really what the seller said it was.

Comments

What do you know about this one?

Specs only go so far. What actually fits, what breaks first, what the factory got right and what everyone ends up changing — that lives with the people who own them, not in a datasheet. Post what you know and it stays on this page for whoever comes looking next.

RELATED PRODUCTS

Gear Help, Handled

From spec questions to full builds — players who have lived this gear since 2007.

Since 2007

Fit & Compatibility

  • Bridge, tuner, and nut fit confirmed for your guitar
  • Pickup and electronics compatibility checks
  • Pedal power and amp/cab impedance matching
Ask Before You Buy

Mods & Upgrades

  • Upgrade paths for the guitars you already own
  • Wiring, routing, and hardware swap guidance
  • Advice from people who actually do the mods
Talk Mods

The Vault

  • Discontinued and EOL guitars kept on record
  • Specs, history, and known part compatibility
  • Share your builds and mods with the community
Enter The Vault